亚洲Av日韩Aⅴ欧美Av 国内

<dd id="cxibi"></dd>

<tbody id="cxibi"></tbody>
    <tbody id="cxibi"></tbody>

  1. <tbody id="cxibi"><noscript id="cxibi"></noscript></tbody>

    <button id="cxibi"></button><li id="cxibi"></li>

  2. PRODUCTS
    HOME>PRODUCTS>CT88KA CNC Conversion of Steam Die Forging Hammer

    PRODUCT

    TECHNOLOGY

    APPLICATION

    VIDEO

    DOCUMENTS


    Description:
    Its appearance is same as CT88K PLC fully hydraulic die forging hammer.

    Its driving system is fully hydraulic driving system designed and made by CFM, fixed on columns with elasticity anti-vibration cushion block. This system uses advanced taper valve control technology, combine cylinder transit technology, double anti-leakage and hydraulic integrating technology, simple system structure. And Key hydraulic components and seals are imported.


    Its striking system use separated hammer body structure, using old pneumatic hammer columns and anvil to modify, and columns are connected to anvil by bolts.

    Its guiding is using the steel X-shape guide rails fixed on the columns by bolts. Extending line of contacting surface of guide rails and ram crosses on the ram center, which cannot effect guide clearance due to heating, and clearance between ram and guide rails can be adjusted to be small to assure die matching. Radial X-shape wide guide structure make sure ram guiding clearance will be not changed due to heating.


    And this guide rails lubrication is automatic and exclusive, whose lubrication oil volume can be preset by operator according to machine requirement, and its level can be monitored. Once there is problem on lubrication system or level too lower, there will be alarm on touch screen and this system buzzer with alarm.


    Conversion of existing steam (air) the die forging hammer with fully hydraulic driving system is with very obvious economic effect and much cheaper than a new fully hydraulic die forging hammer. If the pump house was not considered, the hydra-pneumatic hammer may be cheaper than the fully hydraulic hammer. But in fact if the pump house and the piping system should be calculated together, the steam die hammer conversion will almost be equal. If maintaining cost is considered again, the pneumatic die hammer numerical control transformation l cost will be lower.


    Striking program is easy to input, no need skilled computer engineer, and even semi-skilled worker is OK. When hammer working, control system can check oil temperature, pressure, cleanness and position and then numerical display. Once problem, the malfunction alarm light will be on and the malfunction position and character will be on touch screen.


    Main advantages:
    1) High efficiency
    2) Energy-saving
    3) high accuracy
    4) Low noise
    5) Lower vibration
    6) Reliable quality
    7) Low running cost
    8) Wide application
    9) Ease maintenance and operation



    Main features:
    01) Program control, numerical input, simple operate;
    02) High integrated hydraulic control system, accumulator fixed directly on main valve block without any pipe connecting, improve hydraulic system efficiency and easy for maintenance
    03) Advanced taper valve control, fast response, good sealing and not easy to inner leakage;
    04) High response speed and high reliable redundancy design;
    05) Hydraulic driving system and power system assembled on top separately, no hydraulic pump station on floor;
    06) Touch screen man-machine interface and automatic malfunction diagnosis and alarm, easy for machine operation and maintenance;
    07) Safety design for inner accumulator and pipeline assembly;
    08) Swaying combine oil cylinder and thin piston rod flexible design;
    09) High and low pressure double anti-leakage design;
    10) Long ram structure can improve working accuracy;
    11) Striking energy and steps can be preset at will, no surplus striking energy can reduce striking noise and improve die life;
    12) Slow up and down in the case of releasing hydraulic system pressure to make die changing safety;
    13) Ram buffer is inner hydraulic buffer, to make sure safety and effective;


    Optional machines:
    Special designed die automatic lubrication, blank convey system, ejector and scale removing system are for customer to choose. They can be linked to hammer through program to realize die lubrication locating, timing, quantifying control, to improve its productivity and reduce labor intensity.

    Main technical parameter:

    item

    unit

    CT88KA-

    25

    CT88KA-

    50

    CT88KA-

    80

    CT88KA-

    125

    CT88KA-

    200

    CT88KA-

    250

    CT88KA-

    320

    CT88KA-

    400

    CT88KA-

    450

    Striking energy

    KJ

    25

    50

    80

    125

    200

    250

    320

    400

    450

    Max. Striking

    frequency

    Min-1

    90

    80

    70

    60

    55

    50

    45

    40

    40

    Ram weight

    Kg

    1750

    3400

    5100

    8000

    10500

    11500

    13000

    16000

    18000

    Dropping weight

    Kg

    2100

    4100

    6100

    9500

    12500

    15000

    17000

    20000

    22000

    Main motor

    power

    Kw

    55

    2X55

    2X90

    4X55

    4X90

    4X90

    4X110

    4X132

    4X132







    1.Brochure Download as PDF

    No.88 Shanghu Road, Chengdong Town, Haian, Jiangsu, P.R.China
    Tel.: 0086-513-88368808 | Fax.:0086-513-88369186 | email:cfm@cfmjs.cn

    follow us



    亚洲Av日韩Aⅴ欧美Av 国内
    <dd id="cxibi"></dd>

    <tbody id="cxibi"></tbody>
      <tbody id="cxibi"></tbody>

    1. <tbody id="cxibi"><noscript id="cxibi"></noscript></tbody>

      <button id="cxibi"></button><li id="cxibi"></li>